*FAQ's & Knowledge-base (Cy... - Question #43
How do I dispose of carpet cleaning water?
Stormwater, Clean Oceans, & Pollution Prevention
Water Quality Guidelines for Carpet Cleaning Activities
 
This page is intended to explain the regulatory issues regarding the discharge of carpet cleaning washwater. This brochure also explains the procedures that should be followed when carpet cleaning is conducted either by yourself or by professional carpet cleaners.

When using water and detergents to clean carpets, residents and professional carpet cleaners should follow these guidelines in order to prevent waste or washwater from entering the storm drains where it flows untreated to bays, estuaries and ultimately to the ocean.

These guidelines apply even if the cleaning products are labeled 
“nontoxic?or “biodegradable? Although these products may be less harmful to the environment, they can still have harmful effects if they enter the stormdrain untreated.

Filtering Wastewater:

Both residents and professional carpet cleaners should be sure to filter the washwater from carpet cleaning before discharging it to the sanitary sewer since fibers and other debris in the wastewater can clog pipes. The filtered material can be disposed of in the garbage, provided that the carpet was not contaminated with hazardous materials, which cannot be discharged to the sanitary sewer.

Residential Carpet Cleaners:

Washwater from carpet cleaning must be discharged into a sink, toilet, or other drain connected to the sanitary sewer system within your residence. The washwater should never be disposed of in a street, gutter, parking lot or storm drain.

When hiring professional carpet cleaners ask your contractor where they discharge carpet cleaning washwater.

Check with the contractor to ensure the spent cleaning washwater tank is emptied into a utility sink or other indoor sewer connection.

If you contract with a carpet cleaner regularly, arrange an appropriate location for the contractor to discharge cleaning washwater such as a utility sink, toilet, or sewer cleanout.

Professional Carpet Cleaner Users:

Washwater from carpet cleaning must be discharged to a sink, toilet, or other drain connected to the sanitary sewer system - never to a street, gutter, parking lot, or storm drain.

The spent cleaning fluid can be disposed of in a utility sink or other indoor sewer connection at your home base.

Or, contact the nearest stormwater program agency for additional disposal options.

Preventing Releases to the Storm Drain:

Question: Can any liquids, solids or spilled materials from carpet cleaning activities be discharged to the stormdrain? 

Answer: No carpet cleaning washwater or waste may be discharged to the storm drain. 
Remember: Think...about what you are doing before you start cleaning. 
   
Question: Does the carpet cleaner have the equipment, material and personnel to handle a spill or discharge (such as a detergent spill)? 

Answer: Be Prepared...for any spill or discharge. 
Remember: Pre-plan: Gather the right equipment and enough material ahead of time. 
    
Question: Is it safe for me to clean up spills and discharges? 

Answer: Know...in advance, what you are handling and what to do and make sure staff are trained. 
Remember: Your safety is paramount. 
    
Question: When do I begin to clean up spills and discharges? 

Answer: Act...immediately, using known and safe procedures, and try to contain the spilled material on your property. 
Remember: Protect the storm drain. 
    
Question: Do I need to report spills or discharges? 

Answer: Communicate...the spill to your supervisor as soon as possible. 
Remember: Report all spills and discharges that are not contained on site to the number below or to 911 after hours. 

Remember: Before you allow anything to go into the gutter or storm drain, stop and think.

Storm drains do not go to the sewer, they flow directly into channels and creeks, through wetlands and to the ocean.

Remember the ocean begins at your front door.

For more information or should you have questions, please contact the City's Water Quality Manager at (714) 229-6740.

Created on Aug.  4, 2002 at  7:09 PM (PDT). Last updated by kgraham@cypressca.org on July 26, 2019 at  4:30 PM (PDT). Owned by cmcmahon@ci.cypress.ca.us.
Catherine McMahon
Kirsten Graham
Show fields from Show fields from Show fields from a related table
Report Name *
Description
Reports and Charts Panel
Each table has a panel listing its reports and charts, organized in groups.
Please wait while your new report is saved...
Field label
Column heading override
Justification
What does auto mean?
Fields in:

Fields to Extract:

Name for the new table:
Items in the new table are called:

When you bring additional fields into a conversion, Quickbase often finds inconsistencies. For example, say you're converting your Companies column into its own table. One company, Acme Corporation, has offices in New York, Dallas and Portland. So, when you add the City column to the conversion, Quickbase finds three different locations for Acme. A single value in the column you're converting can only match one value in any additional field. Quickbase needs you to clean up the extra cities before it can create your new table. To do so, you have one of two choices:

  • If you want to create three separate Acme records (Acme-New York, Acme-Dallas and Acme-Portland) click the Conform link at the top of the column.
  • If the dissimilar entries are mistakes (say Acme only has one office in New York and the other locations are data-entry errors) go back into your table and correct the inconsistencies—in this case, changing all locations to New York. Then try the conversion again.

Read more about converting a column into a table.

We're glad you're interested in doing more with Quickbase!

Now we need to make you official before you share apps or manage your account.

Verifying your email lets you share Quickbase with others in your company.

Your work email
Your company