*FAQ's & Knowledge-base (Cy... - Question #11
How can I check for water leaks?
Water
Once you know how to read your water meter, it's time to put that knowledge to work for you. Finding water leaks can save you water, which means you save money on your water and sewer bills. Also, you can figure out how much various appliances are using. 

STEP 1: For leak detection, turn all water-using appliances off so that no water is being used anywhere in the house. Then check the position of the meter dial and wait. If after 15 minutes, the dials haven't moved, congratulations! You have a relatively water-tight home. But, if the dials have moved, start checking hose connections, faucets and the toilets for water leaks. If you have everything turned off and are sure the toilets and connections aren't leaking and yet the dials are still turning, you may have a hidden leak in an underground pipe. If you believe this is the case, you may need to call a plumber for assistance.

STEP 2: Turn on the lawn sprinkler and watch the meter dial move for exactly one minute. One complete revolution of the sweep hand (on the straight-reading meter) or the one foot dial (round-reading meter) represents 7.5 gallons. Count the number of revolutions and multiply it by 7.5 to get the amount of gallons used per minute. Now estimate how long you usually leave the sprinkler running. The hundreds of gallons of water going into your lawn and garden each week may come as a surprise to you. 

STEP 3: Wait for a member of the family to step into the shower and follow the same timing routine. Check the volume of water used and multiply it by the number of minutes a normal shower takes in your family. If you're shocked at how much water is used in the shower, maybe you need a low-flow showerhead. 

Information adapted from the City of San Diego.
Created on July 28, 2002 at 11:44 PM (PDT). Last updated by CityEngineer on May  4, 2010 at  9:58 AM (PDT). Owned by cmcmahon@ci.cypress.ca.us.
Catherine McMahon
Public Works Director
Show fields from Show fields from Show fields from a related table
Report Name *
Description
Reports and Charts Panel
Each table has a panel listing its reports and charts, organized in groups.
Please wait while your new report is saved...
Field label
Column heading override
Justification
What does auto mean?
Fields in:

Fields to Extract:

Name for the new table:
Items in the new table are called:

When you bring additional fields into a conversion, Quickbase often finds inconsistencies. For example, say you're converting your Companies column into its own table. One company, Acme Corporation, has offices in New York, Dallas and Portland. So, when you add the City column to the conversion, Quickbase finds three different locations for Acme. A single value in the column you're converting can only match one value in any additional field. Quickbase needs you to clean up the extra cities before it can create your new table. To do so, you have one of two choices:

  • If you want to create three separate Acme records (Acme-New York, Acme-Dallas and Acme-Portland) click the Conform link at the top of the column.
  • If the dissimilar entries are mistakes (say Acme only has one office in New York and the other locations are data-entry errors) go back into your table and correct the inconsistencies—in this case, changing all locations to New York. Then try the conversion again.

Read more about converting a column into a table.

We're glad you're interested in doing more with Quickbase!

Now we need to make you official before you share apps or manage your account.

Verifying your email lets you share Quickbase with others in your company.

Your work email
Your company